NB604N ADSL2+ Wireless N300 Modem Router
Awesome Support
There are many modems which will work with our adsl services. As you can appreciate we can only support the hardware that we sell. However we have ammassed a wealth of information and screen shots which will assist you with your modem, even if you have an unsupport device.
Specifications
Environmental and Physical
- Operating temperature: 0 - 40°C, Humidity: 10% - 95% non-condensing
- Storage temperature: -20 - 70°C, Humidity: 5% - 95% non-condensing
- Power: DC Input Voltage 12V/1.5A
- Dimensions: 181mm (L) x 135mm(W) x 26mm(H)
- Weight: 245g
Device Interface
- 4 x 10/100Mbps LAN ports
- 1 x RJ11 DSL interface
- 1 x USB 2.0 port - for external Hard Disk Drive Storage
- 1 x WPS button
- 2 x 2 external WiFi antennas
- 1 x Reset button
- LED - Power / Internet / LAN1~4/ WLAN/USB
- Power Jack
ADSL Compliance
- G.992.1 (T1.413)
- G.992.2 (G.dmt), G.lite
- G.992.3 (G.bis/ADS L2)
- G.992.5 (ADSL2+)
- Annex L (reach extended ADSL2)
ATM Subsystem
- PPP over ATM (RFC 2364)
- Bridged IP over ATM (RFC 1483)
- PPP over Ethernet (RFC 2516)
- Multiprotocol Encapsulation over AAL5 (RFC 2684)
- ATM Forum UNI 3.1 / 4.0 PVC
Routing Features
- PPP over PAP (RFC1334)
- PPP over CHAP (RFC1994)
- Transparent bridging as specified in IEEE 802.1D
- NAT (Network Address Translation)
- Dynamic Host Configuration Protocol (DHCP)
- Dynamic DNS support
- Routing Information Protocol (RIP) v1 and v2
- ALG: TFTP/FTP/PPTP/RTSP/L2TP/H323
- DMZ
- SNTP
- QoS
Wireless
- Supports IEEE 802.11n (draft 2.0), IEEE 802.11g and IEEE 802.11b
- Data Rates: Up to 300Mbps for 802.11n, up to 54Mbps for 802.11g and up to 11Mbps for 802.11b
- Antenna Configuration: 2 fixed external antennas (2T2R)
- Operating Channels: 13 channels
- Support 802.1x, WPA/WPA-PSK, WPA2/WPA2-PSK, Mixed WPA/WPA2, and Mixed
- WPA-PSK/WPA2-PSK
- Supports multiple SSIDs
- Supports wireless QoS (WMM)
- Supports wireless protected setup (WPS) with PIN and PBC method
- Support repeater function to extend coverage (WDS)
Management
- Supports TR-069
- TFTP client and server
- IPv6
- DHCP client and server
- FTP server and client
- Universal Plug and Play (UPnP) support
- Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
- Syslog
- Configuration file backup and restore
- Built-in Diagnostic Tools
Compliance
- A-Tick
- Telepermit
Firmware
Updating your Firmware is only recommended if you are having problems with your product or have been asked to do so by a NetComm Reprentative. It is critical to select the correct firmware for your product, before proceeding please confirm you are on the correct page by checking the sticker on the base of your NetComm equipment for the part/product number. You should also read the firmware upgrade instructions - located below - before starting the download.
Please take caution while upgrading the firmware. Installation of the incorrect firmware file, disruption to the power source or a break in the connection to your computer during the upgrade process may render your device unusable and void the product warranty.
Step 1 - Download the Firmware and Upgrade Instructions
- NB604n - NZ Firmware
GAN5.CZ56T-B-NC.NZ-R4B020.zip (6.7 MB) -
NB604n - AU Firmware
GAN5.CZ56T-B-NC.AU-R4B010.zip (7.0 MB) -
NB604n - Firmware Upgrade Instructions
NB604n-Firmware-Upgrade-Instructions.pdf (299.4 KB)
Step 2 - Before Installing firmware
Do NOT use a Wireless connection to upgrade the firmware.
Step 3 - Prepare the files
If the file's extension is ".dat", ".cdi", ".img" or ".bin", do not try to open the files on your computer as they can become corrupt. You need to follow the instructions from the Firmware Upgrade Instructions Guide.
If the file's extension is ".zip" then you need to unzip the compressed files to a location on your computer to get the actual firmware file using UnZip or WinZip software and then follow the instructions from the guide.
GNU General Public License
This product may include software code that is subject to the GNU General Public License (GPL) or GNU Lesser General Public License (LGPL). This code is subject to the copyrights of one or more authors and is distributed without any warranty. A copy of this software can be obtained by contacting NetComm Limited on +61 2 9424 2059. A postage and handling fee of AUD$10.00 will be applicable.
Emulator
There is no emulator available for this product.