NB9WMAXXn ADSL2+ Wireless N300 Modem Router with VoIP
Awesome Support
There are many modems which will work with our adsl services. As you can appreciate we can only support the hardware that we sell. However we have ammassed a wealth of information and screen shots which will assist you with your modem, even if you have an unsupport device.
Specifications
Ports
- 1x ADSL Line port RJ-11
- 1x Telephone Line port RJ-11
- 2x Telephone Handset ports RJ-11
- 4x LAN ports RJ-45 IEEE 802.3 10/100 Base-T, Auto-crossing
WAN Interface
- G.992.5 (ADSL2+ with Annex M support)
- G.992.3 (ADSL2)
- G.992.2
- ANSI T.413 Issues 2
- ATM QoS(UBR,CBR,VBR)
- Multiple PVCs (up to 8 supported)
- F4/F5 OAM Loop-backs/Send & Receive
- AAL ATM Attributes - AAL5
- ATM UNI support: UNI3.1/4.0
LAN Interface
- Ethernet x 4
Wireless
- IEEE 802.11n, backward compatible with 802.11b/g
- Encryption: 64, 128-bit Wired Equivalent Privacy (WEP) Data Encryption
- Wi-Fi Protected Access WPA/ WPA2
- IEEE 802.1x RADIUS Authentication
- Channels: 13 Channels (Australia)
- Data rate: Up to 300Mbps
- MAC address filtering
- XPressTM Technology
- 54gTM Mode
- Wi-Fi Multimedia (WMM)
Adjustments
- Wireless Bridge (WDS)
- AP Isolation
Encapsulation Support
- PPPoE (RFC2516)
- RFC 2684 (RFC 1483) Bridge
- PPPoA (RFC2364)
- RFC 2684 (RFC 1483) Route
- Classical IP over ATM (RFC1577)
Network Support
- Port forwarding rules for popular games and applications
- Static IP, dynamic RIP v1 / v2 routing support
- ARP
- IP/TCP/UDP/ICMP/ARP protocol support
- Network Address Translation (NAT)
- Port Address Translation (PAT)
- Port Triggering
- DMZ host
- Transparent bridging & learning (IEEE 802.1d)
- IGMP Proxy
- IGMP Snooping
- DHCP Server/Client/Relay
- DNS
- Authentication protocols: CHAP / PAP
- VPN (IPSec / PPTP / L2TP) pass-through
- QoS: Layer 3 policy-based / IPQoS / ToS (Type of Service)
VoIP
- 2 x FXS, 1 x FXO
- SIP (RFC3261)
- RTP (RFC1889)
- Codec: G.711, G.723.1, G.729ab
- On/Off Hook Caller ID (ETSI based)
- Lifeline
- SDP (RFC2327)
- Echo cancellation (G.168)
- Silence suppression
Security
- Stateful Packet Inspection (SPI)
- Packet filtering
- Traffic conditioning
- Denial of Service (DoS) protection
- WFQ-based bandwidth management (Congestion management)
- HTTP proxy
- Parental control
- Access Control
- IP filtering
- MAC filtering
Management Support
- Web-based GUI (LAN or remote)
- 'admin', 'support', 'user' access rights
- SNMP agent
- SNTP client
- ILMI 4.0
- TR069
- Configuration backup and restoration
- Syslog (remote / local)
- Software upgrade via TFTP, FTP
- Local firmware upgrade via HTTP (Web GUI)
- Telnet
- SSH
- Diagnostics report with troubleshooting help
LED
- Power, ADSL, Line, Phone1, Phone2, LAN 4, LAN 3, LAN2, LAN1, WLAN, Internet
Power Supply
- External power adapter 240 VAC (input) - 15VDC/1.6A (output)
Approvals
- A-Tick N367
Environmental Conditions
- Operating temperature 0 - 50°Celsius
- Relative humidity 5 - 90% (non-condensing)
Dimensions
- 227 mm (W) x 40 mm (H) x 144 mm (D)
Package Contents
- NB9WMAXXN ADSL2+ Router
- 15VDC 1.6 Amp power supply
- RJ-11 ADSL Line connection cable
- RJ-45 10/100 Ethernet cable
- Driver/Manual & Utility Software CD
- Quick Start Guide
Firmware
Updating your Firmware is only recommended if you are having problems with your product or have been asked to do so by a NetComm Reprentative. It is critical to select the correct firmware for your product, before proceeding please confirm you are on the correct page by checking the sticker on the base of your NetComm equipment for the part/product number. You should also read the firmware upgrade instructions - located below - before starting the download.
Please take caution while upgrading the firmware. Installation of the incorrect firmware file, disruption to the power source or a break in the connection to your computer during the upgrade process may render your device unusable and void the product warranty.
Step 1 - Download the Firmware and Upgrade Instructions
- NB9WMAXXn Firmware
NB9WMAXXn-D111-S310NCM-C01_R12_20110322.bin (3.7 MB) - NB9WMaxxN Firmware Release Notes
NB9WMaxxN_C01_R12_Release_Notes_20110330.pdf (357.7 KB) - NB9WMAXXn Firmware Upgrade Instructions
NB9WMAXXN-firmware-upgrade-instructions_2.pdf (53.8 KB)
Step 2 - Before Installing firmware
Do NOT use a Wireless connection to upgrade the firmware.
Step 3 - Prepare the files
If the file's extension is ".dat", ".cdi", ".img" or ".bin", do not try to open the files on your computer as they can become corrupt. You need to follow the instructions from the Firmware Upgrade Instructions Guide.
If the file's extension is ".zip" then you need to unzip the compressed files to a location on your computer to get the actual firmware file using UnZip or WinZip software and then follow the instructions from the guide.
GNU General Public License
This product may include software code that is subject to the GNU General Public License (GPL) or GNU Lesser General Public License (LGPL). This code is subject to the copyrights of one or more authors and is distributed without any warranty. A copy of this software can be obtained by contacting NetComm Limited on +61 2 9424 2059. A postage and handling fee of AUD$10.00 will be applicable.
Emulator
What is an Emulator?
An emulator replicates the functions of a NetComm device which is viewable from a standard web browser. Emulators are frequently used by support staff to view exactly what the customer is seeing when they login to the User Interface of their NetComm product.